Wednesday, August 3, 2011

Build - Day 23 - August 3, 2011

A bit of a rainy day today but as usual a lot was done by the crew. They put the roof trusses up on the dinette and sheeted the back porch. They also finished up the interior framing of the 2nd story and around the would-be-fireplace.

Speaking of fireplaces, we will have an electric fireplace (see the fireplace post for the details of that decision) so we will not need a big protruding fake wall so the current framing (see pictures below) is gonna be made a little smaller probably on Monday to give us some time to finalize the design.

They also delivered the Master Bath enclosure and D's tub/shower and put up the top-plates on all the walls. For the Holmes aficionados among us, yes, there is a membrane between the concrete and the wood as wood should never touch concrete to prevent moisture transfer.

We also made a few decisions today together with our GC while touring the site:

  • The wall between the kitchen and dinette will be made shorter to allow more light into the kitchen. We'll reduce the number of cabinets /and/or reduce some in size to accommodate this change.
  • The window in D's room will be changed from a single-hung 3x5 to an egress 3x3 to avoid an overlap with the dinette roof structure, which will also bring it in line with the other 2nd story windows on the back of house.
  • We will change the linen closet in our MBR from opening into the 'toilet area' to open opposite the vanities.
  • We will add a poured-in ramp from the back patio onto the in-law suite slider to create a no-barrier-entry and add a poured ramp from the side of the house onto the back patio for the same reason.
  • We will reduce the 16" of stone on the right side and back of the house around the patio to accommodate a higher grade level to help with the poured ramp. 
Crew hard at work on a rainy day.
Top-plates are on. Walls are done.
Current fireplace framing. Will be reduced in size... 
D's window oops. Will be changed to from a 3x5 to an egress window.
Membrane between the concrete and wood to stop moisture transfer.
Dinette trusses.
Starting to look like something... 
For tomorrow and Friday: roof trusses.

Tuesday, August 2, 2011

Build - Day 22 - August 2, 2011

Today they finished up the last ICF block stacking (bit of a rite of passage almost...) to form the 2nd story exterior walls in preparation for an afternoon concrete pour. The also covered the back porch, added the great room and kitchen arches and framed the 4th bedroom upstairs.

At 9am they had finished stacking the ICF blocks. 
Great room view of the stairs, upper window and 4th bedroom.
And they call Montana 'Big Sky Country...'. 
View from the kitchen to the great room.
Close-up of an ICF wall. Solid, solid as a rock...
4th bedroom framed
Our covered back patio. Gonna spend a lot of summer and fall evenings here...

Monday, August 1, 2011

Appliances

*** Update with actual items can be found on the Appliances - Revisted post ***

Now that the kitchen quotes are slowly coming in, we need to get serious about the appliances that will be part of the both the kitchen and the rest of the house. In many parts of Europe, when one moves, the kitchen moves with them. Unfortunately, here in the States, there will not be a lot of appliances from our current home that we can take with us since buyers kind of frown upon a kitchen without appliances. So, short of the toaster and the food processor, everything will stay here and we'll have to dig deep in our pockets to buy new appliances for the new house.

Looking at the price-range the new house will be in, we will not go the Wolf / Sub-Zero, fully integrated look and in the process save a nice 5-figure sum of hard-earned dollars--and the peace of our marriage since Jen would not approve of spending that much! To be honest, it seems that most people go with the commercial-grade appliances more for show than utility since the average American family either eat outs or orders in more often than they cook a meal themselves. For us, it doesn't seem that the extra expense of a brand name is worth it. Jen is a great cook, even without the super expensive appliances.We have opted for appliances made by the Whirlpool corporation since the company I work for does all the transportation for said company and therefore we can get a substantial discount on the average retail price.

We selected the stainless steel models simply because there are less choices now in white and black and we actually do like the look of steel in combination with the dark espresso wood and white quartz counters. Too bad the white and black offer less choices since they usually are a lot cheaper.We did go with the white freezer since it will be in the pantry, and white washers and dryers for the laundry rooms.

So, here are the appliance choices we have made and barring any discontinued items these will be the appliances being ordered in the next few weeks:

Cooktop - Whirlpool 36" Gas
We selected this after first looking at the KitchenAid 36" gas models. The KA units were all close to or over $1000 and this one is less. We like the big 17k BTU center burner and dual 12k BTU, plus dual 9k BTU burners so plenty of cooking power and the recessed grates will nicely contain any spills. The funny thing is that due to the ICF construction the required BTU number for our furnace will actually be lower than the combined output of the cooktop... hmm... ;-)
Whirlpool GLS3665RS
Vent hood - Whirlpool 36" Wall mount
Jen really wanted a flat bottom vent so she could put spices on it like one we found in Europe, but the only ones we found in the States were three times as much as other options that work just as well. In our current house we have recently installed the island-mount version of this vent. It looks stunning, sucks up a small book (with a good install and only a 400 cfm motor), is extremely affordable and looks nice and modern (our style). Funny that affordable and modern are usually NOT mentioned in the same sentence but I guess the exceptions make the rule.
Whirlpool GXW6536DXS

Refrigerator - Whirlpool 36" Satina Side-by-Side
We selected this particular 26 cu ft unit since it has a very good energy rating (ENERGY STAR® Qualified - Tier II), has the faux-stainless finish (read: less finger prints), has glass shelves in both the fridge and freezer section, gallon storage in the door and ice-in-the-door. The popular French-door style doesn't work for us because we cook most of meals from scratch, and then put the leftovers in containers for my lunches. The stackable containers don't work very well with the drawer design in the French-style design but work great with a side-by-side because I can see all my lunch options clearly at a glance. Furthermore, this one has the Satina finish (stainless-look) to prevent fingerprints...
Whirlpool GSS26C4XXF
Wall-oven - Whirlpool 30" Double wall-oven with convection
We selected this double-wall oven because it has a convection unit. We cook a lot and both units will be used almost daily. We do not need a dual convection unit since we hardly ever have two receipes at the same time both calling for convection. It also saves a crazy amount of money since you'd have to go KitchenAid and the like for that option.
Whirlpool GBD309PVS
Dishwasher - KitchenAid Superba ProScrub
We did not look at the Whirlpool dishwashers since they are not very highly rated and the Miele models are simply not in the budget so we went for the nice middle ground with KitchenAid. We selected this particular model since it has a ENERGY STAR® Qualified - Tier II rating, built-in food grinder and only a 49 dBA sound level. It will do very nicely.
KitchenAid KUDES35FXSS
Freezer - Whirlpool 20 cu-ft upright freezer
In our pantry we will have a full-size upright freezer since we cook a lot and buy our meat in 20 to 40lbs increments through our local farmer(s market), and it will allow us to buy larger portions of our bulk goods (at a lower price per pound). We know they are not as energy efficient as a chest freezer, but the accessibility of an upright freezer is simply far superior to having to empty a chest freezer out while looking for an item. Initially I looked at a 25 cu-ft, but those are real energy hogs, so we stepped down to a 20 cu-ft unit with full-length door-shelves and plenty of storage inside yet still carriers an ENERGY STAR® Qualified rating.
Whirlpool EV201NZTQ

Microwave - Sharp drawer unit
This one was pretty much a no-brainer from the moment we saw it. We value our counter-space over the cheaper price of the table-top units and are doing all drawers for the kitchen cabinets so a microwave drawer unit was an ideal fit. Especially since we only use it occasionally as an assist in defrosting or re-heating some left-overs. Furthermore, while you can buy a DCS, Jenn-Air or Viking unit, but they are all made by Sharp (they hold the patent...) with different fronts. So, we'll save some money and buy the Sharp model...
Sharp KB-6524PS
Disposal (island sink) - Waste King
Everyone keeps buying the InSinkerator and they are great disposals but most every test of disposals ranks them number 2, right behind the Waste King. So we went with the L8000 for the prep sink. The prep sink will see the most action and for the regular sink we'll use the builder-supplied model simply since it will be mainly used for rinsing prepared food versus the larger, chunkier food prep items the Waste King will be dealing with.

Waste King L8000
Washer/Dryers - Maytag
We are normally only a family of 3 - but with room for guests... - so we don't need the super-high capacity washers, but with me being from Europe and used to front loaders we'll get the HE front-loaders this time around. Again, not the top-of-the line but good, decent, quality-built Maytag units, with an ENERGY STAR® Qualified - CEE Tier III rating, 3.6 cu-ft washer with NSF Steam Cycle and a 6.7 cu-ft electric dryer (to save money by not having to run a gas line to the 2nd story). As part of our universal design plans, we have a laundry rooms on both the upper and lower floors. Our regular wash will be done upstairs, and the downstairs laundry will be available for kitchen linens, our son's future stinky sports clothes, and any laundry overnight guests might need to do without having to go upstairs to our laundry room.
Maytag MHWE201YW
Maytag MEDE201YW
I realize that there are literally thousands of options on all these items, but by using the Whirlpool brands where it makes sense we can save quite some money, plus - most of the units - are made close to Ohio.

Now we have to go spend the money... necessary evil I guess ;-)

Bright Ideas

This weekend, Niels and I popped into a few lighting stores. We've been looking casually, but since our lighting choices will need to be made soon, I thought I'd post a few thoughts we have on the topic.

Bedrooms and Great Room:
This is easy. We'll do ceiling fans with lights in most of the bedrooms and the great room. With the ICF walls, our new house will not fluctuate in temperature as much as a stick built home. We should be able to reduce our air conditioner use considerably by simply circulating the air. Something like this will do nicely:
60" Edge Possini Euro Design Ceiling Fan, a nice big energy efficient fan from Lamps Plus. Also available in 52".
Our Son's Room:
We have a toddler who loves all things that go: planes, trains and automobiles. As a general rule, we try to avoid brands with him, although he does have a disproportionately high number of Thomas trains. In his room, we're learning toward a generic transportation theme, with the thematic details coming from decals and accessories that can be removed. 

However, we saw this fan at The Great Indoors and he loved it. 
Low Profile IV Plus with Airplane Blades 42"
We could buy any energy-efficient fan we'd like, and then replace the blades, which are sold separately. 
Cute airplane blades from the Hunter Sweet Pea collection.

We could also do this transportation/sport combo. I'm not sure if it's two sets, or reversible  or...
Back Porch:
I'm not nearly the outdoorsy girl I should be, but with the nice big backyard we'll have in the new house, I know I need to get out more so that our son gets out more. We saw a covered back porch in a model a few months back, and quickly revised our plans for the original screened porch to the new bigger covered porch with ceiling fans! (I realize this is a slight tangent from the topic of lights, but we'll have lights on the ceiling fans).
I won't mind being outside with these bad boys!
This is the back porch that inspired me, and I might add, was one of my more brilliant ideas with the house. 
View from under the porch. 
This is very close to the size and look of our back porch We'll have sliders off the dinette, and then a nice long covered porch. Now, one fan or two?
Dining Room:
This room will elicit a bit more discussion between Niels and I. He actually shipped the dining room fixture from his house in Belgium when he moved to the States six years ago. It's been packed nice and snug in a box since then, and is currently packed nice and snug with our packed boxes. I haven't seen even a photo of it. But I do know Niels' style and I love the cost of free. So, when the time comes, we'll take it to a lighting store, unpack it, and we don't hate it, will see about getting it re-wired for American use. 

However, I have fallen in over with this fun fixture, made of capiz shells:
Large rectangle hanging capiz pendant from West Elm.
Isn't it pretty!?!
The practical side of me will probably win out because we're focusing our build money on the things that can't easily be changed later. But, who knows...

***update***
My sweet hubby just reminded me that I left out the office, which, for obvious reasons, will not have a ceiling fan. So...it looks like I can get my pretty capiz shell pendant after all. Let the bargain hunting begin!

Kitchen:
In addition to a few can lights, lights under and above our cabinets, and something in the pantry (I still need to think about that). We'll have three pendants over the outside island. 

My first wish was something like this to go with the cork floors:
Alentejo Square Pendant by Forecast Lighting.
Sadly, they cost way more than I can rationalize spending. Unless some helpful soul can find them for $50 or less... (Oooh! I did find this round one for $57.)Something like this is really nice, and much better on the budget at $35/each.

Carnom Margo One in Brushed Pewter
This one adds some color to our transitional kitchen:
Green Cirrus Wishes Shade by Forecast.
This is an eco-friendly choice, not bad at $60/each:
Minka-Lavery Brushed Nickel Energy Star Mini-Pendant
Fun light from a open house this weekend.
Another fun light from a open house this weekend.
In all honesty, what we'll probably do with pendants is just find something energy efficient on the contemporary side and call it good. There are so many fun pendants out there, but I just can't justify a lot on little lights when when inexpensive ones are just as practical.

Foyer and Hallways:
We've only started looking at these lights.  A few that have caught our eye:
  

Bathroom Lights:
I fell in love with resin panels after seeing them on HGTV. I wanted to use them for shower doors. Still in negotiations about that. If we did, these would be really cool bathroom lights!
And of course, we want to take advantage of the sun on the second floor with a few of these solar tubes:  

Build - Day 21 - August 1, 2011

A new month and a new floor to complete. August will be the month where the build will reach its highest point and also when the progress will start to slow down. After having our stairs issue resolved we can get full-speed ahead with the 2nd story and roof structure.
First look at 8:30am
Lunchtime progress
End of day.
The great room forms have been completed.
The beam has been removed from the stairs.
First peek at the second floor
Tomorrow the crew will pour the walls in the second story.

Build - Day 19/20 - July 30/31, 2011

This past week a lot has been accomplished and we went from main level ICF stacking to having interior walls and a sub floor for the 2nd story. We also found an issue with the stairs to the 2nd story - which has since been resolved - and are looking forward to the progress being made in the 1st week of August.

It appears by this time next week we might have the trusses for the roof up and maybe even have the roof sheeting done. Here's to good progress... ;-)
Related Posts Plugin for WordPress, Blogger...